X

Fill the form below and get a free quote!

Thank You. Your Message has been Submitted

BACK TO FORM

FAQ

Have a question?

The average vehicle takes about an hour to two hours.
Factory tinted windows offer privacy but do not protect your interior of your car from heat or damaging UV rays. After market window tint is designed to block UV and heat and offers you and your interior protection from the sun. Factory tint can never be removed but you can install window tint right over it to get UV protection and add the much needed heat rejection.
The best thing to clean your window tint with is a micro fiber cloth and an ammonia free window cleaner. You must use ammonia free products with all films.
This is completely normal and this condition will go away on its own. We use soap and water solution to clean the windows and help move the film around to get it in to the right position. We squeegee as much of this solution out as possible but some of this solution remains between the film and the glass. This usually takes 30 days to dry. These bubbles are normal and should be left alone. Forcing these bubbles to move can lift the adhesive and damage your film.
No, the rear defroster can be used right away without affecting the defroster or the tint.
This depends on the film you choose. There are some films that can fade and do not have a warranty against fading or changing of color.
Window tint is not permanent and can be removed at any time. It can be a very difficult job and a professional should be used for this process. Removal can take anywhere from 30 minutes to several hours depending on the difficulty, quality and age of the film.

Maryland

    Tint darkness for sedans:
  • Windshield: Non-reflective tint is allowed on the top 5 inches of the windshield.
  • Front Side windows: Must allow more than 35% of light in.
  • Back Side windows: Must allow more than 35% of light in.
  • Rear Window: Must allow more than 35% of light in.

    Tint darkness for SUV and vans:
  • Windshield: Non-reflective tint is allowed on the top 5 inches of the windshield.
  • Front Side windows: Must allow more than 35% of light in.
  • Back Side windows: Any darkness can be used.
  • Rear Window: Any darkness can be used.

Virginia

    Tint darkness for sedans:
  • Windshield: Non-reflective tint is allowed above the manufacturer's AS-1 line.
  • Front Side windows: Must allow 50% in the two front doors.
  • Back Side windows: Must allow more than 35% of light in.
  • Rear Window: Must allow more than 35% of light in.

    Tint darkness for SUV and vans:
  • Windshield: Non-reflective tint is allowed on the top 5 inches of the windshield.
  • Front Side windows: Must allow more than 35% of light in.
  • Back Side windows: Any darkness can be used.
  • Rear Window: Any darkness can be used.

DC

    Tint darkness for sedans:
  • Windshield: Non-reflective tint is allowed along the top of the windshield above the manufacturer's AS-1 line or 5"
  • Front Side windows: Must allow 70% in the front two doors
  • Back Side windows: Must allow more than 50% of light in.
  • Rear Window: Must allow more than 50% of light in.

    Tint darkness for SUV and vans:
  • Windshield: Non-reflective tint is allowed on the top 5 inches of the windshield.
  • Front Side windows: Must allow more than 70% of light in.
  • Back Side windows: No reference in current laws.